Amitec EMI10 EMI / EMC Training System helps in
understanding of electromagnetic emission and get
first-hand experience with real-world compliance
problems and tools. It contains everything a student
needs to start learning Electromagnetic Compliance. It
contains the near-field probes for electric and magnetic
Fields , an EM demo board shows multiple electrical and
magnetic field problems found in many products.
Probes identify and evaluate signal integrity problems in
high-speed circuits and can differentiate electric and
magnetic fields. Low noise amplifier increases the
sensitivity of CRO. EMC analyser can identify and
locate signals in abroad frequency range.
* Effectiveness of a shielding material
* Location source of emissions of pcb tracks
* Effectiveness of a Ferrite as a HF suppressor
* Measuring induction into conductors
* Tracking currents on a conducting plane
* Estimating cross talk on PCB
Type Sensor H/E Freq. Sens.
M1Loop H-Field 40dB 800 MHz High
M2Loop H-Field 30 dB 1.5 GHz Med.
M3 Loop H-Field 10 dB 2.5 GHz Low
Type Sensor E/H Freq. Sens.
E1 Omni E-Field 30 dB > 1.0 GHz High
E2 Narrow E-Field 30dB >3.0 GHz Low
Low Noise Preamplifier
Emissions Reference Source
EMC Analyser
EM Demo Kit
LF/HF Electromagnetic Detector
Antenna
E-Manual: Installation Video for ease of Learning
Frequency Range 9KHz-4GHz
Noise figure 3dB
Gain 20dB
Compression 1dB 10dBm
Frequency 10-4000 MHz
Steps 10MHz/50MHz
Resolution 100KHz 4 digit LED display
Range -90dBm - +10dBm
Noise Figure 4dB
Input Impedance 50 Ohms (BNC)
CRO Output Linear X, Log Y out (BNC)
Frequency range 9KHz - 3 GHz
Sensitivity -70dBm
Resolution 0.1dB
Log periodic Antenna 0.1-4 GHz
Impedance 50 Ohms
RF level at 3m 40-80dBuV/m
Frequency 1-500MHz
SMPS, EM demo board, Ferrite Suppressors, Shielded
Cans,
Biconical 0.05-2GHz
Magnetic Loop 9KHz-30MHz
