Amitec Model MIC20 uses a broadband Microwave source

working over a bandwidth from 2-4 Ghz, 10MHz-12.4 Ghz

power meter and 2-8 Ghz Slotted Line. Several modules using

low loss substrate are provided with etched surface mounted

circuits. Gold plated SMA connectors are provided on each

modules for repeatable connections. Teflon cables are

provided for low loss interconnects.

* 2-4 GHz source.

* 10 MHz-12.4 GHz Power meter.

* 2-8GHz Slotted Line with 20dB directivity.

* 20 different MIC modules provided.

* Gold plated SMA connectors on low loss substrate.

* 0.1dB resolution LCD with bargraph.

* Wide power range +20dBm to -30dBm.

* High measure speed at all power levels.

* Measurement in dBm, mW, dBr, dBW, dBuW, dB relative.

* Shock/Drop resistant Sensor.

Microwave Source : 2 GHz to 4GHz

Frequency Display : LCD

Power level : 10dBm typical

Output Impedance : 50 Ohms

Power Supply : 100-240VAC, 47-63 Hz

Frequency range : 10MHz to 12.4 Ghz

Display : 16X2 Backlit LCD

Power range : -30dBm to +20dBm

Resolution : 0.1, 0.5 and 1dB

Measurement : dBm, dBr, mW, dBW, dBuW

With Digital Display

Ranging : Auto-ranging

Sampling : 1,10,100 readings per sec.

Relative Offset : +20.0 to -30.0dBm for

relative measurement

User setting : +3.0dB to -3.0dB in 0.1dB step

Level Indicator : Bar Graph

Power : 100-240VAC, 47-63 Hz

Connector : SMA

Frequency Range : 10 MHz to 12.4 Ghz

Compensation : Temperature compensated

Thermistor

Impedance : 50 ohms

Maximum input : +20dBm

Return Loss : 15dB at 12.4GHz

Cable : Sensor/meter cable 3m

Frequency Range : 2-8GHz

Directivity : 20dB Typical

Connector : SMA